![]() If you are a newcomer I recommend you buy a new digital camcorder, this will give you high video and audio quality and get you started on video editing pc is very easy, suitable for beginners. ![]() If this is your problem replace the switch if the new switch does it still then you might have to take a small resistor and shunt it across the brake light switch.If you are new to video editing PC and know where to start it can be difficult, so hopefully, this guide will point you in the right direction.ĭepending on your needs or goals there are many different solutions to be discussed, so I will divide them into different categories.ġ. But to start I would checked to see if when the switch is off it actually all the way open if it has a small amount of continuity it might be enough to bleed a small amount and light the idicator LED but not enough to light the brake light. Not sure if this is the problem every one else is having. Pluged in a new ECU and problem solved pluged in the switch and no indicator light and reverse works. When power is present on the brake light idicator wire to the ECU reverse does not work. ![]() With the switch still unpluged I jumpered out the wires to turn on my brake light. Thought maybe the brake light switch could be going to ground checked that it was ok. ![]() I then unpluged the brake switch and the brake light on the cluster went off and the reverse worked. Not enough to turn on the brake light but enough to send voltage to the ecu. Checked my brake switch on my brake lever and found even with the switch open it was closed allowing a small amount of voltage to bleed thru. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |